Cleva Power 11.1V 60Ah Boat Energy Storage Battery

11.1V 60Ah Boat Energy Storage Battery

The Standard Capacity Of Battery Pack :60AH

The Standard Voltage Of Battery Pack :11.1v

The Standard Voltage Of Cell: 3.7v

Combination : 3 In Series

Max Charging Current (A): 30A

The Range Of The Charging Voltage :9v-12.6v

End Of Charge Voltage: 12.6v

Standard Charge Model: CC/CV

Charging Time : ≥12h

Max Continuous Output Discharging Current(A):60Ah

Max Instantaneous Output Discharging Current(A):120Ah

The Range Of The Discharging Voltage :9v-12.6v

End Of Discharge Voltage : 9v

Short Circuit Current Protection: ≥180A

Short Circuit Current Protection Delay Time: (Us):<400US

Short Circuit Protection Release : Load Disconnect Or Charging

Self-Consuming On Working (MA):《1mA

Self-Consuming When Out Of Working(UA):250uA




Working Temperature:-20℃~60℃


Design Scheme Of Battery Pack For Boat Energy Storage:

1) Protection Circuit Board (PCM):Mainly Design Against Protection Circuit Board For Rechargeable High Capacity Battery Pack. Because Of The Chemical Characteristics Of Lithium Battery, In Order To Avoid Burning, Explosion Etc. Dangerous Situation, Must Provide Over Charge, Over Discharge, Short Circuit, Over Current & Over Heat Etc. Protection Function.

2)Protection IC(Protection IC):Main Protection Function Chip In Design Scheme, Carry On-Line Constantly Monitor On Over Charge, Over Discharge, Over Current, Short Circuit Etc. Function Of Battery Cell. Ensure Batter Cell Work Within The Scope Of Safety, Stability, High Efficiency.

3) Over Current Protection Chip(PTC):Mainly Design Against Secondary Protection Function. PTC Can Recover Thermal Fuse With Dual Function: Over Current Protection & Auto Recovery. PTC Inside Battery Cell Can Prevent The Cell Occurs High Temperature Discharge And Un-Safe Large Current.

4)MOSFET Chip:MOSFET Chip, On On-Off Action In Protection Circuit

5)Packing Of Battery Pack:Plastic Film + Waterproof Box